CLR 125 PICTURES!!!!!!!!!!!!!!!!!!!

[CGK1]

Got all these bits for free today, so while i had it all stripped down i give it a lick of paint

The frame is a Honda CLR125, but the forks are knackered due to a crash. All the bodywork is CLR, and the engine is a SYM (chinese CB125). I have most of the bits i need to get it going (need forks though ), and personally i think the tank and seat look pretty good.

The only issue is the engine wiring, as it is CDI but i only want a kill switch (no lights). There are two pictures of the wiring from the engine, and where they come from. The one with the mulitiplug goes into the box, perhaps its a gear indicator or something

[CGK1]

The wires ;

[ben1]

I wouldnt knock thoose chinesee engines , mostly all honda parts fit when doing a rebuild , i have a engine like that but from my Apache POR 125 , fully rebuilt with honda , hasnt missed a beat , and it gets thrashed everywhere at about 60-65 mph lol

[CGK1]

Sounds good ;D The engine most probably needs a new gearbox, so do you think CG or CB 125 will fit?

[ben1]

ye i belive it will

Edit : There are two different types or chineese engine , but by the picture this is the same type as mine and mine has honda parts inside.

[CGK1]

Ok, cheers

[ben1]

Good luck with the engine , i got a few in peices in the garage , im pretty sure i got a gearbox? i will look.

[CGK1]

That would be great!!! How much?

I got the engine serviced today, but i thought the flywheel cover was like a cg one, so i undid the bolts to get it off. Lots of oil came out

Heres todays work:

Painted a few little bits from the engine





But most of all, the tank







Cheers

[ben1]

My dad said it is too usefull for my bike to get rid sorry dude.

[CGK1]

Ahh, nevermind . Might just get a new engine as im not sure how much hassle it is to change the box

[ben1]

just remember where you take the engine compoments from lol

[CGK1]

hehe, yeah

I dont suppose you know about the wiring? I really need to know which wires go where on the cdi

[CGK1]

Help!! I have Black/red, Blue/white and Green/white from the engine,



So where do they go on the CDI? The CDI is 6 pin, but only 5 are used, so there are two left for the coil and kill switch. But i dont know which ones go where ??!!!!



Cheers

[ben1]

Let me look on my bike , i will take a photo dude , dont know how long i will be

[CGK1]

THANKYOU SOOO MUCH!!!!!!!!!!!!!!!!!!!!!!!!!