|
|
Post by downton on Jun 29, 2011 15:48:01 GMT
Well the motor is now complete with new carb and 60cc Kit fitted..   |
|
|
|
Post by jawathemutt on Jun 29, 2011 22:53:54 GMT
that inlet manifold needs a bit of work(that 90 bend has to be mucking up the gas flow) apart from that what a ace idea,keep going iwant a go when its done:)
|
|
|
|
Post by TerraRoot on Jun 30, 2011 9:08:30 GMT
i think the inlet is blocked by the frame, post the rest of the pics you have in the introduction area dowtnon
|
|
|
|
Post by downton on Jun 30, 2011 19:28:20 GMT
Unfortunately there is not much to be done with the manifold,the motor does sit with the cylinder facing front and many use a manifold turned to allow the carb to face the front but again it has the 90 degree in it.At present my budget will not stretch to a race crank and am still on the standard one which only has bush type small and big end and not roller type so have to be a bit conservative with revs at the moment. This is what you can get them to do ! |
|
|
|
Post by downton on Jun 30, 2011 19:31:55 GMT
|
|
|
|
Post by jawathemutt on Jun 30, 2011 19:57:48 GMT
if you can supply me with some dimensions ill make a manifold for you,ive also got a nice and simple 24mm amal carb if its of any use
|
|
|
|
Post by downton on Jul 1, 2011 17:24:11 GMT
Cheers Jawathemutt..may just take you up on that.Have a spare inlet manifold you could work from..Carb wise the amal carb would be a little to big with what I am running..Next project on the cards is an old Skoda Pickup rat look to stick the Puch on,and still got thinks to do on my Skoda Estelle 105 daily runner ..so Once up and running the Puch or Puchati as its now being called (got some 916 footrest hangers to put on it) will have to stay as is for a while..Just ordered a chrome box section swingarm in a vain attempt to try to fit some 2.75x17 metzeler tyres I found at work but think I will have to force me wallet open and get some smaller rubber..  Me 105 estelle ..  |
|
|
|
Post by wrighty on Jul 2, 2011 8:24:14 GMT
What a great little project...keep us updated.  |
|
simmo
Retro Apprentice
Posts: 6
|
Post by simmo on Jul 2, 2011 9:50:55 GMT
A great little project indeedy! watch out for the custom made bits we're doing...
|
|
|
|
Post by downton on Jul 2, 2011 13:54:49 GMT
Simmo..AKA RangerBob from RetroRides of the JDM style arches Fame! See you found the Puchati,s little corner..  |
|
simmo
Retro Apprentice
Posts: 6
|
Post by simmo on Jul 2, 2011 21:39:26 GMT
lol....Puchati's corners cool dude! will be posting up some old bikes, have found your 400/4 and CB750K pics too!
|
|
|
|
Post by jawathemutt on Jul 4, 2011 15:06:14 GMT
progress.... you have pm re inlet manifold
|
|
|
|
Post by downton on Jul 5, 2011 6:48:09 GMT
Jawathemutt..Using Mozilla browser and not seeing PM panel,tried in IE also but still no access to PM,s May be my security settings..Going away for a couple of days so will contact you when I get back..Cheers!
|
|
|
|
Post by TerraRoot on Jul 5, 2011 7:27:04 GMT
i use chromium, no probs with PM's it is hard to see since its only a tiny single line down bellow the board, it literally says
Your Personal Messages: * New: *
|
|
|
|
Post by wrighty on Jul 5, 2011 8:47:42 GMT
If you open messages and go to preferences at the top right(red suitcase thing) you can select to be notified of any incoming messages. Cant miss them then. |
|
