CGK1
Retro Fitter
Posts: 133
|
Post by CGK1 on Aug 24, 2010 21:15:25 GMT
Hi, My feild bike project came with very bent fork tubes, but lower aluminium legs are fine. How do i remove the tubes? i have undone the top nuts, remover the springs and oild and undone the bolts at the bottom, but i cant get them out. Can
So can anyone help?
PS: Anyone got a spare set of clr125 forks? ;D
Cheers
|
|
|
Post by TerraRoot on Aug 25, 2010 7:13:05 GMT
the bolts at the bottom, they the really big ones that are allen headed and usually quite filled in with dirt hidden about where the axle is installed? If your looking to straighten em you don't have to take them apart, Also there is a clip at the top of the legs that holds in the seal, needs to come out.
|
|
CGK1
Retro Fitter
Posts: 133
|
Post by CGK1 on Aug 25, 2010 12:20:46 GMT
I dont think it's possible to straghten these one ;D You'll see ehat i mean when i get some pictures up :L The bike hit a lamp post at about 65, so it's safe to say there pretty buggered Thanks for the advice, i'm off to try it now
|
|