|
Post by TerraRoot on Dec 24, 2012 20:44:40 GMT
Hols started on saturday. now that i’ve gotten over the christmas party hangover i spent two hours today on the YZF, first the fuel tap. Opened it up, had a look, diaphragm seemed fine, hmm, ah no spring? should be fine now. Didn’t bother replacing some of the other seals, don’t leak so no worries! actually some of them i have no idea where they go. looks like the seals for the electric reserve tap, hope the reserve tap is ok. Took off the top yoke to repair the holes drilled into it. probably fill it with epoxy and use a very thick primer/filler before painting it standard silver. Also i soldered all the dodgy wireing, no pics of that it’s very boring. Should be able to start putting bits back on soon, then it'll look like i've made progress
|
|
|
Post by TerraRoot on Jun 15, 2013 20:55:37 GMT
Update time! somewhere along the way i have painted and filled the hole in the top yoke, but no pics. last week i finally took the forks off. not because i set out to do this monumental job (note sarcasm), i was just bored standing around helping/advising a mate on how to put his bros back together. so the forks are now in my dads care, and the first thing i noticed was that the free spare forks we got are not adjustable. gonna have to change (if we can) the lower axle holder thingies of the leg. have a sexy sixpot.
|
|
|
Post by steadyeddie on Dec 4, 2013 20:59:36 GMT
Nice ride.... but then I'm prejudice! Attachments:
|
|